Description
INTRODUCTION TO PARKING GUIDANCE SYSTEM
A suitable solution for car parking models in buildings, apartments, and shopping centers. The fully automatic smart parking guidance system for car parking in buildings uses ultrasonic technology. Allows statistics on the number of cars, parking locations of cars according to daily, monthly and short-term time frames, helping managers know the usage status of the parking lot.
SYSTEM ADVANTAGES
-
Real-time parking status monitoring
Displaying real-time parking lot information such as the number of cars in the lot, the number of empty spaces, statistics on the number of cars entering/exiting the lot helps to monitor and deploy parking staff effectively.
-
Statistics on the number of cars over time.
Statistics of the number of vehicles in the parking lot by day, month or in a certain period of time help the parking lot manager grasp the efficiency of parking lot exploitation.
-
Displaying the status of vehicle location on the map
The system allows to build parking lot maps and display actual parking locations on the map. Helps the manager grasp parking lot information on the actual map.
-
Displaying parking lot information on indoor and outdoor LED boards
Displaying the number of vacant spaces on indoor and outdoor LED boards, helps drivers decide whether to park their vehicles in the parking lot and drive to which vacant space in the parking lot.
MAIN EQUIPMENT OF THE SYSTEM
1. Central controller CCU.01
The central controller controls the entire car vacancy notification system, collects data from ultrasonic sensors through the intermediate controller ZCU.01, from which it sends signals to the LED board displaying vacancies and instructions on the paths placed in the tunnel.
* Specifications:
Power supply 12Vdc, 1000mA
VGA output, LAN
Connect up to 60 ZCU, LED devices
With map function (optional)
Dimensions 25x 35x 11 cm
2. Area controller ZCU.01
The controller is the controller that supplies power and manages ultrasonic sensors, each controller allows connection of up to 60 sensors. will collect data from ultrasonic sensors and then transmit communication signals to the central controller.
* Specifications:
Operating voltage: 24Vdc
Maximum current: 200 mA
Communication port 1: connects to the central controller and LED panel
+ RS485 communication standard
+ Communication speed 9600 bps
+ Maximum communication distance: 1000m
Communication port 2: connects to ultrasonic sensors
+ RS485 communication standard
+ Communication speed 9600 bps
+ Maximum number of sensors that can be connected: 60 sensors
3. Display light indicating vacant space status Led.01
The light allows color conversion (green or red) to indicate whether there is a car in the parking space or not. The control signal is sent from the ultrasonic sensor installed above the parking space. The LED indicator light is installed in front of the parking space.
* Specifications:
Operating voltage: 5Vd
Maximum current: 30mA
Color: Blue, red
4. LED board indicating the total number of vacant spaces - Outdoor LED board
The outdoor LED board will display the total number of vacant spaces in the building's parking lot. The outdoor LED board is usually placed in front of the building's gate.
* Specifications:
Power supply 5Vdc, 40mA
Size: depends on the design according to the investor's requirements
5. Indoor parking lot LED board Led-LD.01
The parking lot LED-LD.01 will display the number of vacant spaces and the direction of the arrow for drivers in an area of the tunnel. The LED board is usually placed at the tunnel entrance or at the three-way intersection to indicate the direction.
* Specifications:
Power supply 5Vdc, 2A
Dot matrix: 16x 48
Size: 23x 42x 9cm
There are 02 colors that can be set on the software: Blue, red
Arrow position and arrow direction are controlled on the software
6. Ultrasonic sensor: there are 2 device lines that can be selected
a. Ultrasonic sensor SS.01
The sensor is the most important component in the vacant space notification system, using ultrasonic waves to determine the status of the parking space
The sensor is connected in series, connected to the ZCU.01 area controller according to RS485 standard
The sensor is installed above the center of the parking space, automatically controlling the signal to the vacant space status indicator Led.01 installed in front of the parking space, turning green - red according to the status of the parking space with or without a car
* Specifications:
Operating voltage: 24Vdc
Maximum current: 10 mA
Detection distance: 0.5m - 3.5m
Size: 10x 4cm
LINK DOWNLOAD CATALOG
b. Two-in-one ultrasonic sensor
This sensor uses ultrasonic waves to detect whether a car is in the sensor area or not, thereby displaying a blue or red LED integrated right on the ultrasonic sensor, and simultaneously transmitting a control signal to the ZCU area controller. The ultrasonic sensor is installed above and in front of the parking spot.
* Specifications:
Operating voltage: 24Vdc
Maximum current: 45 mA
Communication: RS485
LED color: Blue, red
LINK DOWNLOAD CATALOG
Contact for consultation & order now: Hotline 0918 647 248
Email: info@greensmart.vn